Deck Toggles are for cable runs that must attach to the surface of a wall or post. The Deck Toggles are not tensioners as they must be anchored before the other end of your cable run is anchored. The Deck Toggles are paired with a tensioner such as a Threaded Terminal or Deck Toggle & Stud Turnbuckle. The Deck Toggles are anchored with two lag screws (1/4″ x 2″ stainless lag screws recommended) or bolts (1/4″ diameter) and are good for indoor or outdoor applications. The Deck Toggles are T316 “marine grade” stainless steel and hand-crimps onto the ends of your cable runs using a Hand Crimper Tool.
Overall Length of Deck Toggle (from plate to end of shaft) = 3-13/16″
Length Between Center of Hole to Center of Hole on Mounting Plate = 1-5/16″
Overall Length of Mounting Plate = 1-15/16 “