facebook

1/8″ Short Stud

$4.95

Categories: ,
Share

Description

Short Studs provide a “dead end” for a cable run. The Studs are not tensioners as they must be anchored before the other end of your cable run is tensioned and would be recommended on short runs. They are typically paired with a tensioner such as a Threaded Terminal so that the caps on the ends will be the same. The Short Studs are good for indoor or outdoor applications. They are T316 “marine grade” stainless steel and hand-crimps onto the ends of your cable runs using a Hand Crimper Tool.

Overall Length of Terminal = 2-3/8″
Thread Diameter = 1/4″-20
Thread Length = 3/8″
Drill hole size = 1/4″

Stainless Steel Washers are recommended for wood posts. The Short Studs can be finished off with Stainless Cap Nuts, Colored Vinyl Caps or decorative Stainless Dome Caps.